|
In other articles, I have mentioned that charging the Ergonite while the resin
is curing has a large effect.
To start out with, not all organic components are not equally responsive to
charging while the resin cures. Polyester resin, acrylic resin and pitch all
demonstrate this property in significant degrees. The waxes seem a lot less
responsive in this area, something which i attribute to the formation of
crystalline structures within the resin while solidification takes place.
Polyester ("Fiber Glass") resin, for example, is well known in conventional
scientific circles to have significant electromagnetic attenuation properties.
That means that it absorbs electromagnetic energy. Since energy is never created
or destroyed and only changes form, the energy soaked up by the resin has to go
somewhere, doesn't it?
After experimenting for a couple of years, i can comfortably say that the way
Ergonite is treated during construction creates at least a 70% difference in the
finished product. In other words, by paying some attention to the thoughts,
emotions, energies, etc. to which the Ergonite is exposed when you make it, you
can generally get at least 70% more functionality than you would if you did not
pay attention to these factors.
Now, i would like to point out that the beauty of Ergonite is that you can get
that 30% functionality, regardless of how you make it. It is not NECESSARY to
charge the resin while it cures, it is an improvement. And in many cases, 30%
functionality is more than enough to make a significant difference. But if the
Ergonite can be made yet more potent, why not do so? If you can optimize the
Ergonite to work with a specific ailment, or to do a chosen task, then it only
seems prudent to do so.
There are, imo, 2 main ways in which the Ergonite absorbs a charge / program
while it is curing. One way is through the person making it, and the way that
they influence the energy while handling the materials. Another way is to expose
the Ergonite to energies generated by various metaphysical tools while it cures.
Obviously, both of these approaches encompass many different techniques. Both of
these two approaches can be used either alone, or in combination with each
other. Myself, i generally use a combination of the two.
It is also possible for the Ergonite to turn out with either a sympathetic or a
counteractive effect. The frequencies used in the following description are just
examples. So, if you expose Ergonite to a hertzian frequency of say 15kHz,
generated by a device of some kind, the Ergonite will become more responsive to
that 15kHz frequency. The fact that the Ergonite is now more responsive to 15kHz
can be applied in one of two primary ways, depending on what thoughts and intent
you expose it to, or what other frequencies are present. If you expose the resin
to 15kHz and leave it at that, the finished Ergonite will tend to amplify the
15kHz frequency effects when stimulated by it. It will tend to produce that
frequency effect as part of it's output, converting other energies it is
stimulated with INTO the frequency effect of 15kHz. The same applies if you
expose the resin to both a weak 10Hz signal and a strong 15kHz signal. It will
tend to 'capture' the act of 10Hz being drowned out by 15kHz, and have that
function programmed into it. Doing it that way, you are getting a sympathetic
effect towards 15kHz.
But suppose you flip it around the other way. Suppose you expose the resin to a
15kHz signal, and at the same time give it a clear mental impression that you
want to dampen out and get rid of 15kHz. If you do it that way, you will get a
counteractive effect, in proportion to the clarity of the mental impression you
give the resin. It will tend to respond well to 15kHz, but instead of amplifying
15kHz, it will dampen it out, and convert 15kHz into other energy 'colors' or
frequencies. The same applies if you were to expose the Ergonite to a strong
10Hz signal and a weak 15kHz signal. It would then capture the act of 15kHz
being drowned out by 10Hz, and have that function as a 'program'.
In reality, the way that different frequencies interact with each other has
arguably a bigger effect that the volume of each signal. There are frequencies
that are harmonic to 15kHz, and they tend to boost it. There are frequencies
that are discordant to 15kHz, and they tend to dampen it. So, both the relative
strength of each signal and the effects of signals on each other produce an
effect.
By default, Ergonite seems to produce a sympathetic effect to that which excites
it during curing. In other words, if you want to get a counteractive effect, you
have to 'tell' it you want a counteractive effect. This, doubtless, is why some
tower busters have a greater effect than others. Many people are programming the
Ergonite with a counteractive effect to the tower's signals, whether or not they
are consciously aware of it. Many other people are not, and so the Ergonite is
running at varying degrees of efficiency. Rather than criticizing, it is my hope
that this will help people all around to improve their Ergonite manufacture.
People who are already doing reiki, visualization, or other traditional
metaphysical disciplines will find that whatever energy they put into the
mixture will, to some degree at least, become a permanent part of the finished
Ergonite's energy signature. This applies, of course, whether or not a person is
consciously using metaphysical discipline of some variety. Even if a person is
not consciously directing energy into the Ergonite while it cures, their
thoughts and emotions, the state of their mind, the things they are thinking
about while working with the materials... these all have some effect on the
finished product. It appears to me (so far) that consciously directing your
energy into the Ergonite often produces a greater change in the finished product
than not. The exception to this would be states of great emotional intensity. If
you are in a state of emotional excitement, then a part of that emotional energy
will be picked up and integrated into the Ergonite.
So, if you are a person who uses prayers, affirmations, declarations,
visualization, intent or the like, then you can program your Ergonite with these
techniques. One thing to bear in mind if using minerals other than quartz
crystals is the kinds of jobs that various minerals are suited to doing. For
example, if you are making Ergonite and programming it to get rid of toxins in
the body, then you could make that process either more efficient or less
efficient, depending on what minerals you include. If you include minerals that
have the effect of stimulating the body to release toxins, then the mineral and
the program are harmonic. If you use a mineral that stimulates the body to
absorb energy but program the Ergonite with a purgative effect, then the result
will generally be a bit less effective. In short, the orgone output spectrum of
the finished Ergonite is defined by a COMBINATION of the ingredients and the
programming, so it pays to give a little thought to how you put those 2 factors
together.
So what if you are making Ergonite and you inadvertently put a bunch of nasty
thoughts / emotions into it? Well, they WILL affect it somewhat, but not enough
to reduce its effectiveness beyond the 30% line, in my experience. They will
make it work less well, but not stop it from working entirely imo. One thing i
have discovered is that say, for example, you think 'issue X is horrible'. well,
you don't want the Ergonite to enhance the horrible nature of issue X,
obviously. But once you have thought that thought, it is difficult if not
impossible to take it back. So give the Ergonite a counteractive program with
respect to issue X. Immediately think another thought, namely, that you wish to
direct the healing / clearing properties of the Ergonite toward issue X, and
work on the problem. This produces Ergonite that works specifically
(counteractively) on issue X. Not a bad recovery from a little slip of the mind.
Practitioners of radionics will likely be familiar with this concept, point
being the concept is of course transferable to Ergonite manufacture.
Another example... Some time ago i made some Ergonite TBs which had a few flies
fall into the resin while it was curing. I didn't think it that important,
though maybe i felt a little sorry for the flies. The Ergonite came out with a
sympathetic effect towards houseflies. It was amazing to watch how they just
couldn't leave it alone. They would be buzzing around the light bulb, and kept
stopping and landing on the TBs, which i must admit i found rather annoying. But
at the same time, others have reported success using TBs to get rid of
problematic insect infestations, by including a sample of the insect in the
Ergonite. Whether they knew it or not, and i must assume they did, they included
the intent that they wanted a counteractive effect. And they saw that the insect
infestation was reduced. The difference between my TBs attracting the insects
cast inside them, and their TBs repelling the insects cast inside them was
simply the difference between a counteractive effect and a sympathetic effect.
Again, those familiar with metaphysics will probably find this familiar
territory.
Bearing that in mind, i am sure you will understand why programming the resin
with the intent that you want to counteract the inimical health effects of the
HAARP and GWEN towers is worthwhile. Also perhaps this sheds some light on why
there exists such variance in the observable effects of TBs. Without the intent
to get a counteractive effect (since if you live in area with towers the resin
is exposed to the signal from the towers while it cures) you will get the
cleansing effect in the 30% range. But if you add the simple thought that you
want the Ergonite to have a counteractive effect, you will get much more
efficiency, up to several hundred percent improvement.
Rather than going into detail about how to do visualization or focus your
intent, i will just say that your emotions are a big part of it. For example, if
you are making Ergonite to help your sore back, then you want to make sure that
the Ergonite is programmed by imagining a healthy back, free from pain. Or
perhaps imagining a sore back turning into a comfortable, pain-free back. You do
not want to program the Ergonite with you wondering if it will work. That saps
efficiency. So if you have doubts, well that just means you are human. We can
not always instantly finish up with our doubts or uncertainty. But we can put
them out of our minds for a few minutes. And in those few minutes when we have
put our doubts out of our mind and have stopped thinking about them, that is the
time to do your intent or programming or visualization. For posterity, the same
thing applies with prayers, affirmations, declarations, etc., with or without
Ergonite.
Ideally, you want to charge the Ergonite for the duration of time it takes to
cure. This may or may not be possible. I have found so far that with the mental
impressions, it is best to do it at least 3 times. Since polyester resin
actually continues to cure for a long time after it has solidified, you
generally have about a 3 day window of opportunity to charge the resin, though
the initial period when it is solidifying appears to be the most critical. Once
the plastic has cured, you cannot reprogram the resin, but you can reprogram the
crystals embedded within it. You can also direct the energy that the Ergonite is
producing to a given task with your intent. Directing the output from the
Ergonite is different than charging the resin. Using your Ergonite's energy
output is giving the output a job to do. Charging the resin while it cures is
defining what the output will be.
When using a machine to program the Ergonite, depending on how strong the
machine is, a ten to 15 minute period of exposure is often enough to produce an
effect, but where possible i often give it up to 72 hours of exposure.
If you have a radionics machine, succor punch, pulser, wand, or some other kind
of intent amplifier / orgone generator, you can use that to either charge the
Ergonite or enhance the mental impression (intent) that you give the Ergonite.
You can also set your favorite xtal (if you work with xtals) near it while it
cures and use that to charge the resin. Varying methods of charging give varying
degrees of success. Any kind of attention to the charging process will produce a
more effect than none, i find.
One way you can charge the resin is to devise some means of connecting a quartz
crystal wrapped with a mobius coil to the output of your pc sound card. I have a
bit of info about one such device on the ring generator tutorial page. Even a
smaller device such as a succor punch, connected to the output of a pc sound
card, provides a very versatile apparatus for charging Ergonite. If you are
unable to to set up something like that, then even using a tone generator and
exposing the Ergonite to the sound produced will charge the resin. I am amazed
at Ergonite's ability to accept a program and repeat it almost indefinitely.
Roberto Forcen, at his site Voicesync, has some very impressive sound analysis
and sound generation software. One of his programs that i have worked with a
fair amount is called mineral sounds. In his own words, it 'Generates resonant
three octave compound tones from a list of more than 3000 minerals. Tones are
generated using powder X-ray Diffraction parameters.' What i can say is that
when i fist started playing with it, i was very impressed. When i run the sounds
from this program through my big mobius-driven orgone generators, the energy
produced is very similar in 'feel' and in 'color' to the energy from the
minerals themselves. Aside from using it to program Ergonite with the effects of
a mineral i would like to have, but don't have on hand (not quite the same as
having the actual mineral in the Ergonite but close if you let it run several
hours), i use it to compliment the ingredients of the Ergonite. For example, if
the Ergonite contains steel, copper and quartz, i will open multiple copies of
this program and charge the Ergonite with the sounds of iron, copper, quartz,
and gold. This gives the Ergonite a lot more power when it is finished.
Sunlight is another wonderful thing to expose the resin to while it cures, and
so is moonlight. These two methods of charging the Ergonite are already in
widespread use. Especially with exposing the resin to sunlight, you will often
notice a difference in the visible color of the resin when it has cured,
indication that you are in fact doing something and this is not all hocus
pocus... ;)
Astrology also has a certain amount of influence on the Ergonite, though not one
with which i often work. Using a large orgone generator to charge it can drown
out some of the astrological effects, it would appear. One batch i did during
the harmonic concordance came out very nice, and it appears to have captured
some of the intense catalytic energy of the harmonic concordance.
Another way you can do it is to pour the Ergonite outdoors, preferably in
contact with the earth, in a clean vortex or ley line. This way tends to both
stimulate the vortex or ley line and program the Ergonite with a permanent link
to the area in which it was poured. Alternately, you can add some dirt or wood
chips from the vortex to the Ergonite and pour it elsewhere. I have used this
technique to link together a few different medicine wheels in the area.
Possibly, it could be used to create and/or divert energy lines in the earth's
body, leading to or from the vortex.
While i was proofreading this article, i phoned my friend of several years Chris
Gozdzik from diviningmind.com, and asked him if he thought i had left out
anything glaringly obvious. He reminded me about linking, which is another way
that you can do several things with Ergonite, including charging it while it
cures. Basically, if you link the Ergonite to the energy from an existing large
source of energy, either by a sample of the source or clear visualization, then
the Ergonite will not only pick up the energy from the existing source as a
program, but will also have a permanent link to the energy source. Thanks, Chris
:)
And 2 final notes- If you are building a ring generator, power radionics
machine, or other large power-driven orgone generator, first decide what
frequencies you plan to use to drive it with. At least pick out a few of the
ones you plan to use a lot. Then, charge the Ergonite for the generator with the
frequencies it will be running at. This increases power in the finished
generator.
Many of us have noted that Ergonite, once cast, sometimes takes a certain amount
of time 'start working'. Charging during curing dramatically reduces the amount
of time that it takes a device to 'start working'.
Well, that about takes up the time i have today, but here are a few of my
favorite hertzian frequencies for charging Ergonite, and some the effects i have
observed with them.
741Hz (sine wave) - This is one of the solfeggio tones, and is quite potent imo.
When i first started using it i immediately felt a buildup of energy and
subsequent release in the solar plexus and heart chakras. It may be a bit
intense for some people at first, but they should rapidly acclimatize. It
appears to have the effect it is reported to by others, that of assisting with
finding the solution to a problem. I use it a fair amount these days, and thanks
to whomever it was that posted about it on the yahoo cloudbusters forum some
time ago.
528Hz (sine wave) - This is another one of the solfeggio tones, and it has
proven useful for me in manifestation.
5075Hz (square wave) - A frequency i chose myself for use in the driver circuits
of the pulsers. It tends to have a grounding, stabilizing effect. I use it as a
multipurpose frequency to drive generators, and to help me calm down when i get
cranky ;)
32kHz (square wave) - Another frequency i chose for use in the pulsers, tends to
have the opposite effect than 5075Hz, but meshes well with 5075Hz. I use it for
removing blockages in body work, for shielding from energy attacks, and for an
aid in the mental 'reach upwards' involved in meditation and remote viewing.
When set to a frequency higher than 20 kHz, NCH toner produces a lower harmonic
of target frequency. Since square waves especially produce many harmonics
ranging up and down the scale, imo you are still getting this frequency (or one
close to it) as a harmonic when you use a pc sound card connected to a coil and
xtal.
15Hz (square wave) - The frequency many people use to drive their succor
punches. It tends to have a solid, relatively stable effect. Of the low
frequencies, it is one commonly used today. It is potent, though imo benefits
from the company of a higher frequency. Useful for shielding from energy
attacks. Also, if you have a 15Hz driven SP, then charging your Ergonite with
15Hz will increase the responsiveness of your Ergonite to your SP.
32Hz/31.7Hz (square or sine wave) - A frequency i first heard of from (i
believe) Bruce Stenulson. It has proven very useful as an aid in programming
quartz crystals. Because of it's tendency to carry programming information /
intent from the user to a quartz crystal, it is useful imo for intent
amplification, and as a general purpose frequency for driving mobius-powered
orgone generators.
68.635kHz (square or sine wave) - This one of the Hodowanec frequencies. Now,
since the upper end of the sound card is well below this frequency, i am not
actually getting this frequency when i put it into the NCH toner program that i
use as a signal generator. When set to a frequency higher than 20 kHz, NCH toner
produces a lower harmonic of target frequency. Since square waves especially
produce many harmonics ranging up and down the scale, imo you are still getting
this frequency (or one close to it) as a harmonic. When run through the nch
toner, and a mobius/quartz driven orgone generator, it produces an emission of
orgone that is almost all in the violet range. Violet orgone is both soothing
and cleansing, good for soul-searching as well as healing.
For posterity, below is the text file from which i first heard of the solfeggio
tones.
1. Ut = 396 = 9
2. Re = 417 = 3
3. Mi = 528 = 6
4. Fa = 639 = 9
5. Sol = 741 = 3
6. La = 852 = 6
UT-quent laxis
1. a syllable used for the first note in the diatonic scale in an early
solminzation system and later replaced by do. 2. the syllable sung to this note
in a medieval hymn to St. John the Baptist. <Gk. -Gamut- 1. the entire scale or
range; the Gamut of dramatic emotion from grief to joy. 2. the whole series of
recognized musical notes [1425-75]; late ME (Middle English)><ML (Medieval
Latin)-contraction, of Gamma, used to represent the first lowest tone of (G) in
the Medieval Scale Ut, Re, Mi, Fa, So, La, Si. <Gk - Gamma- 1. the third letter
of the Greek alphabet. 2. the third in a series of items. 3. a star that is
usually the third brightest in a constellation. 4. a unit of weight equal to one
microgram. 5. a unit of magnetic field strength equal to 10 to the fifth power
gauss. (quent: needing), (laxis: loose; axis-an affiliation of two or more
nations. Also Axis Powers.)
RE-sonare fibris (Res-o-nance)
1 a: the state of quality of being resonant. b(1) a vibration of large amplitude
in a mechanical or electrical system caused by a relatively small periodic
stimulus of the same or nearly the same period as the natural vibration period
of the system 2. the prolongation of sound by reflection; reverberation. 3a.
Amplification of a source of speech sounds, esp. of phonation, by sympathic
vibration of the air, eesp. in the cavities of the mouth, nose and pharynx. b. a
characteristic quality of a particular voice speech sound imparted by the
distribution of amplitudes among the cavities of the head, chest, and throat.
4a. a larger than normal vibration produced in response to a stimulus whose
frequency is close to the natural frequency of the vibrating system, as an
electrical circuit, in which a value much larger than average is maintained for
a given frequency. 5a. a quality of enriched significance, profundity, or
allusiveness; a poem has a resonance beyond its surface meaning. 6. the chemical
phenomenon in which the arrangements of the valance electrons of a molecule
changes back and forth between two or more states. (in percussing for diagnostic
purposes) a sound produced when air is present [1485-95]; <MF (Middle French),
<L Resonantia, Echo=Reson (are) to resound + Antia-ance. (Re-a prefix, occurring
orig. in loan words from Latin, use to form verbs denoting action in a backward
direction, Action in answer to or intended to undo a situation, or that
performance of the new action brings back an earlier state of affairs. (fibris:
fibre string, vocal cord.)
MI-ra gestorum (Miracle)
1. an extraordinary occurrence that surpasses all known human powers or natural
forces and is ascribed to a divine or supernatural cause esp. to God. 2. a
superb or surpassing example of something; wonder, marvel {1125-75}, ME<L
Miraculum=Mira(Ri) to wonder at. fr (French): sighting, aiming to hold against
the light. (gestorum: gesture; movements to express thought, emotion, any
action, communication, etc. intended for effect.)
FA-muli tuorum (Famuls.)
... plural Famuli, 1a. servant/s, or attendant/s, esp. of a scholar or a
magician [1830 - 40<L (Latin), servant, of family. (Tourum - quorum - 1. the
number of members of a group required to be present to transact business or
carry out an activity legally. usu. a majority. 2. a particularly chosen group.
[1425-75;<L quorum of whom; from a use of the word in commissions written in
Latin specifying a quorum.)
SO-lve polluti (So-lve')
1. to find the answer or explanation for; clear-up; explain; to solve a mystery
or puzzle, to work out the answer or solution to (a mathematical problem.)
[1400-50, Late ME<L Solvere to loosen, release dissolve=so-var, after velarl, of
se-set-luere to wash; (see Ablution.) Ablution n. 1. a cleansing with water or
other liquid, esp. as a religious ritual. [1350-1400]. (Pollutii-pollute-luted,
1. to make foul or unclean,)
LA-bii reatum (Labi-al)
1. of pertaining to or resembling a Labium. 2. of pertaining to the lips, 3. (of
a speech sound) articulated using one of both lips. 4. of or designating the
surface of a tooth facing the lips. 5. the labial speech sound, esp. consonant,
[1585-95]; ML lingual. (reatum - reaction - 1. a reverse movement or tendency;
an action in a reverse direction or manner. 2. a movement toward extreme
political conservatism; 3. a desire to return to an earlier system or order. 3.
action in response to some influence, event etc.; 4. a physiological response to
an action or condition. b. a physiological change indicating sensitivity to a
foreign matter.) 6. mech. the instantaneous response of a system to an applied
force, manifested as the exertion of a force equal in magnitude, but opposite in
direction, to the applied force [1635-45].
SI (Sancte Johannes)
1. a person of exceptional holiness, formally recognized by the Christian Church
esp. by Canonization. 2. a person of great virtue or benevolence. 3. a founder
or patron, as of a movement. 4. a member of any various Christian groups. 5. to
acknowledge as a Saint. Canonize [1150-1200]; ME Seinte. Canon: 1. an
ecclesiastical rule or law enacted by a council or other competent authority
and, in the Roman Catholic Church, approved by the Pope. 3. a body of rules,
principles, or standards accepted as axiomatic and universally binding, esp. in
a field of study of art. 6. any officially recognized set of sacred books. 10.
the part of the mass between Sanctus and the communion. 11. consistent,
note-for-note imitation of one melodic line by another, in which the second line
starts after the first. (axiomatic). 1. pertaining to or of the nature of an
axiom; self-evident. 2. a universally accepted principle or rule. 3. a
proposition in logic or mathematics that is assumed without proof for the sake
of studying consequences that follow from it.
|
