the BIO-GE/M™ series Modulated Scalar Field Bioenergy / Psionic tools

Powerful and durable orgone generator-modulator devices for heavy duty radionics / group treatment energy healing / radial area effects / homeopathic remedies / manifestation / psionics / psychotronics / self-help / NLP / brainwave entrainment / self-hypnosis / rife-style therapy etc. A series of refinements to the basic design elements shown on the ring generator information page have gone into these devices.

At the heart of device is an oversized toroidal mobius coil (series quadrifilar toroidal coil with helical twist) made from heavy duty #18AWG magnet (lacquer insulated) copper wire. The appropriate resistance and cable connecter are included to facilitate hook up to standard small audio systems and acquire a signal. The coil is encased in a series of Ergonite castings which form a powerful Orgone field (even without a signal to the coil). The signal, when put through the coil, creates Aetheric flux and Scalar Wave Patterns (from the audio and radionic data carried on the signal) and further excites the Ergonite to maximize its output of bioenergy.  The end result is that you have a strong radial vorticular field of Orgone for radionics or healing which surrounds the BIO-GE/M™ ring, pulsing in time with the audio signal fed to the coil. You control the signal. This device is intended for experienced researchers / therapists. There is no dedicated user manual but the unit ships with manuals which have techniques transferable to the BG series. Also, custom modified units come with a mini-manual details the relevant specs of your machine.

The BG series are Ring-Shaped Scalar-Driven Bioenergy Generators with modulate capacity.

Both of the ring generator models generate a toroidal field which discharges somewhat from the ends. The field is strongest at the hole in the center, but also radiates from the sides of the ring. The BG III is more directional in that it pulls from the base and pushes from the top of the ring. The BG IV is less directional in that it pulls in from both flat sides of the ring and compresses the field at the center.

Both BG series rings can be used with a quartz crystal as the core object. This is the normal mode of operation when you want to generate a radial field from the ring, and extend that field over the local area where the ring is located. It is also the normal mode of operation when using the ring to generate a beam of energy to direct towards the desired subject.

When using the ring to generate a beam or an effect over a wide area, a sample placed in the beam will absorb energy and send some of it to the remote target, but it will also acts as a 'filter' and color the beam. A metal reflector such as a large steel mixing bowl upturned over the protruding xtal tip will see more energy transferred to the target when used in this mode.

The signal to sample is much stronger if the sample is placed in the hole at the center of the ring. For a more direct link to a remote target, place the sample either in the hole by itself, or between the inner wall of the ring and the quartz or other core object. If you want to use the ring for treating water or other substances, order the ring with a larger interior diameter and place the whole jar of water (or other substance) in the hole, instead of a quartz crystal.

As far as power level, 0.5 to 100 W is the range most of these things run in commonly. There is such a thing as too much power, but really it depends on what you are ding. The need for power is proportionate to the work being done, and for example a given setting may be really effective at transferring an energy pattern to water but not especially pleasant to stand
beside, so don't stand beside while it's running if so. Other settings may be better for body work but a bit slow for potentising liquids, just to use this comparison of tasks as an example.

2 models of the ring generator

The original BG III is about 6 kilos or more in weight, measures roughly 8 inches by 4 inches and has (by default) a hole at the center of about 1.5 to 2 inches diameter, hole size can be made to your specs (up to max 4 inches I.D.) for a  custom charge of 125.00 CAD which includes custom connection styles and (low power) resistance to match your specs.. It has one internal mobius coil, uses a small mono audio signal or tone generator to drive the coil, and costs 375.00 CAD plus shipping.

If you already own a radionics system, I can make the ring generator fit your present radionics system no problem, what is the connection style and the minimum resistance that your amplifier circuit needs to protect from a short? If you are not  sure about this, I can help you determine the best way to connect it to your radionic circuit for a variable fee depending on the time and work involved.

Since these items are built to order, they take as long as they take. Having said that, lead time is currently 3 months. If you like, I can optimize the programming of the Ergonite to your chosen application. I do take a little while to do what I do, but I always ship the orders and about 50% of my clients are repeat customers, who consider the products to be worth the wait.

The advanced model BG IV is larger, has a hole in the center about 6 inches in diameter, hole size can be made to your specs (up to max 8 inches I.D.) for a  custom charge of 125.00 CAD which includes custom connection styles and (low power) resistance to match your specs.. The BG IV has an integrated compound reflector and other advancements to the design. It requires a stereo audio signal to drive the 2 coils.  The coils in the BG IV are made in mirror image of each other and carefully arranged to maximize scalar field interference between them. The unit costs 550.00 CAD plus shipping.

The weight of the BG III is about 6 kilos, and the weight of the BG IV is more than 6 kilos. The weight varies from unit to unit, but since they are made of high density resin, metal, and stone, they can get pretty heavy. The mobius coils in these units are oversized, made from heavy-duty lacquer-insulated inverter-duty solid copper wire, in 18 AWG standard or 14 AWG by request. The coils will handle WAY more power than you are going to be putting through them on your average radionics circuit. You are responsible for your own common sense and any decision to operate the units of power levels higher than the 5W default recommendation. The are VERY effective if you know what you are doing, and if you do not then operating the device at 5W or less is much safer.

The BG IV is several times more powerful than the BG III and for the serious researcher / practitioner. Users report it is more than strong enough but can be overwhelming if sitting in close proximity for long periods of time while it is running. This unit is designed for experimental use or batch-processing of homeopathic remedies, etc. For general purpose use such as producing a refreshing or invigorating biodynamic response effect effect inside your house, then the BG or the OFP are more appropriate.

The BG III and BG IV come with a 1 year warrantee and reasonable technical support via email or phone for the term of the warrantee, the Wizzers Workshop compilation CD (manuals, eBooks, eZines, audio files for driving coils) and a sturdy wooden shipping / storage crate with form-fitting Styrofoam packing blocks. Lead time apx. 3 months. Shipping crate is the same style as the one depicted at left, though of course that case is holding a custom modified OFP and not the BG. Cases are built by hand to order and therefore dimensions vary according to what they have to hold, but the picture should illustrate the current style of case that you will receive.

For more information or to place an order, email jon7@img.net or orders@littlemountainsmudge.com .

Consulting

Consultancy fees by telephone are in the range of 60.00 / hour CAD. Email rate is 25.00 per email with up to 3 questions per email. Consultancy is with Jon Logan and my area of expertise is:

scalar - orgone - 'subtle energy' field dynamics in general and basic concepts associated therewith / perceptual biodynamic response-based  engineering methodologies / radionics & psychotronics engineering for biodynamic, environmental and aetherochemical response effects / theoretical analysis of related technology examples / design development of related technology examples.

or:

applied traditional metaphysical discipline / theoretical basis for interface of conventional physics with traditional 'mystical' concepts and current 'alternative science' concepts / cosmological theory

 I am self educated and the content of this website is indicative of the degree of understanding of these fields I possess, you must be fluent in the English language.

If you wish to enquire about consulting, then email to jon7@img.net is the preferred method of contact, otherwise leave a message on my answering machine and I will respond by phone or email. Consulting sessions must be prepaid and are non-refundable.

Orgonite ^TM is a trademark belonging to Karl Welz, the inventor of orgonite, and is used on littlemountainsmudge.com for educational purposes.  Wizzer's Workshop ^TM,  Ergonite ^TM,  Welzite ^TM, Wood Sprite ^TM, Water Baby ^TM, Chocolate Shine ^TM and O-Matrix Material ^TM are trademarks of Jon Logan, Owner of littlemountainsmudge.com. All text and images on this site on this site, unless clearly otherwise stated, are copyright 2003-2006 Jon Logan, all rights reserved. Limited authorization to reproduce: This material may be reproduced or reprinted freely, in whole or in part, for educational purposes.  Owner of copyright for text and images on littlemountainsmudge.com and trademarks used on littlemountainsmudge.com  reserves the right to refuse, suspend or revoke limited authorization to reproduce this material if the material is reproduced inaccurately, or if printed material from this website is sold at a cost in excess of it's production without prior written consent from the owner, or if printed material from this site is used commercially without stating in the printed copy that the material is copyright 2003-2006 Jon Logan. Webmasters using material from this site must include " courtesy Wizzers Workshop http://www.littlemountainsmudge.com" at the end of the portion of content which is reproduced on your website.