NEW Dec 2006 - limited time promotion - free access to issue 4

Chemtrails - Something you can do by Jon Logan

By this point, if you haven’t heard of chemtrails, then you must have been living in a cave somewhere. Chemtrails. Lines in the sky, drawn by aircraft.

Lab tests of samples collected from chemtrails have been reported to contain many toxic ingredients. It appears that there are at least 2 main kinds of chemtrails, and the most common by far is an aerosol mixture of oil, powdered metal (usually barium or aluminum) and powdered quartz. The other kind(s) have been reported to contain desiccated human blood cells and virulent bacteria. Fortunately, I have never seen the second kind where I live. They are the ones that form ‘spider webs’ in the sky which drift down and are deposited on the landscape. More common by far is the sight of an airplane, usually white, which leaves a streak of white vapor behind it that hangs in the sky, and / or spreads out to form a haze which covers the sky from horizon to horizon. The clouds in some cases become dark and overcast, in others they flee and vanish as drought sets in. The sky has a silver haze to it like smoke. Under some lighting conditions, the Chemtrail haze creates rainbow circles in the sky as sunlight is refracted by the layer of oil suspended in the atmosphere.

Many people experience health problems as a direct result of chemtrails. Difficulty breathing, sudden flu-like symptoms, and intense headaches are commonly reported. For more information on the Chemtrail phenomenon you can google ‘chemtrails’ and you will find many websites dedicated to the analysis of chemtrails, describing the phenomenon in much greater detail than it is the purpose of this article to do.

In fact, this article assumes that you have already heard of chemtrails. If you have, and have looked into it, then you will probably know already that some people are doing an excellent job of raising public awareness on the subject. Of course, if that effort is to have been to any purpose, then someone somewhere has to actually do something about it. Nobody seems sure exactly what to do about it, though.  Until now, that is.

Maybe one day mass protests in the street will end the international spray project, and the people at the top who are responsible for it will fess up and explain everything. But in the meantime, there is actually something that you can do, and it is relatively simple. It has been repeatedly proven to produce results, and it will produce results on a scale commensurate to your effort. Interested? Read on.

The main adverse effects of chemtrails are environmental contamination (especially with heavy metal toxicity), adverse health effects to biological life, and aberrant weather phenomena. These problems all respond to treatment with Orgone technology and / or Radionics. Something you can actually do about chemtrails is to build a Chembuster, and install it somewhere near your home.

A Chembuster is a device which uses Orgone technology to stabilize the weather patterns of a localized area. It was invented by a man named Don Croft about 5 years ago. It has been repeatedly observed to clear the smog created by chemtrails and to take much of the energy out of violent storms. In some areas it has been repeatedly observed to cause the break in a long standing drought. Overall, its effect on the area of its use appears to be, in a word, balance. If an area is afflicted with drought then the Chembuster will tend to increase precipitation and the formation of clouds in its area. If the area has violent storms or an excess of rain, then the Chembuster will tend to diminish the violent weather patterns and stabilize the local weather within a microclimate extending for a few miles in all directions. These effects in some cases manifest dramatically at the moment of the device’s installation, but for the most part appear gradually and steadily over a period of months and years.

A Chembuster has many similarities to a Cloudbuster. A Cloudbuster is another Orgone tool which is used to modify weather patterns. Cloudbusters were invented by a man named Wilhelm Reich about 70 years ago. They work by moving large amounts of Orgone, and the Orgone in motion causes changes to the temperature and movement of air. Since it can change the way the air moves and how warm or cool it is, it produces changes to weather patterns. A Cloudbuster requires that you know something about weather patterns, and something about Orgone energy, and have some degree of humility in its use. Otherwise, it creates problems in the wrong hands because it is a powerful piece of technology which can alter weather patterns.

A Chembuster is like a Cloudbuster in that it moves large amounts of Orgone around in a predictable fashion. But it is different in that it changes Orgone from one form to another. A Cloudbuster is designed to be used by a person, consciously directing the tool to produce a desired result. The Chembuster is designed to respond to changes in the Earths Orgone field and be self-regulating. So far, I and many thousands of other people around the world have found it to be just that... safe.

When installed, the Chembuster processes Orgone in such a way as to harmonize the energy. It removes accumulated Radionic data and breaks up stagnant Orgone energy, gets it circulating again. It circulates Orgone energy and processes it as it does so. Additionally, it changes the speed at which it allows energy to circulate in response to local changes in the Earth’s Orgone energy field. These functions may seem complex, but the engineering is relatively simple. In layman’s terms, the device is installed, and then becomes part of the Earth’s Orgone field, acting to augment the Earth’s natural ability to ‘heal itself’. This has the demonstrable result of beneficially affecting the health and emotional morale of human beings, stabilizing violent weather patterns, and reducing or eliminating the haze associated with chemtrails.

Back in the early days many of us were concerned that Chembusters would cause the heavy metals from the chemtrails to accumulate and concentrate near the device. There are persons now who still say that this is the case, but I disagree, based on my experience. After 3+ years, I have seen nothing to support this view.

So what happens to the metals then? I am not entirely certain. I think that a certain amount of them are in some way rendered inert by the aetherochemical effects associated with Radionics (www.littlemountainsmudge.com/Radionics.htm). Whether the toxins in the aerial spray are deposited elsewhere and filtered out in the water cycle, or whether the toxins are transmuted into harmless elements by the action of the Orgone energy, the fact is that it certainly seems to be cleaner around here since I started using the devices. We seldom if ever have days when the air literally smells of Chemspray, but this used to be common, before the Chembusters were in use.

We still get sprayed, but the haze doesn’t hang for near as long, if at all. The drought we had experienced for several years has diminished with each successive year since I started using the devices in my area. In fact, this year it looks like there will be enough water in the river I can actually take the canoe out for a spin.

Build one, you can get the info for free on the web, and you don’t have to be know what you are doing or be humble to use it. You can be a jerk, and it will still work. Heck, imo the guy who invented the Chembuster IS a jerk, FWIW. The technology still works.

This may seem anticlimactic if you were expecting an article about the exact chemical composition of chemtrails, or about the latest sightings, or a compilation of data and documentation proving that chemtrails exist. You can get that for free on the web, just use google.

But if you want to actually make a difference in your life, you can build one of these devices for 50 to 250 USD, and start cleaning up the mess. It’s an array of metal pipes, parallel but not touching, a few inches apart. The pipes are held parallel by a dielectric disk with holes cut in it to form a spacer. One end of the pipes are open. The other end of the pipes have a short piece of plastic hose stuffed inside the pipe. A small quartz crystal is nestled inside the hose, and the end of the pipe with the crystal is covered with metal tape or a metal end cap. Each of the 3 to 10 pipes is done that way, open on one end and the other end is covered with a metal cap, inside the end with the metal cap is a small crystal wrapped in dielectric tubing.

The pipes are assembled into a parallel array, and the end with the caps is cast into a big chunk of MHD Orgone Matrix Material. That’s it. I have tried many variants and they all work, though the relative size of the components can make the device either more or less efficient. I recommend viewing the original specs, (which are public domain btw). You can find them on this page:

http://www.metatech.org/Cloudbuster_&_Orgone_generator.html

I and other experimenters have found that many components of the basic design can be successfully varied, the design is actually quite forgiving and adaptable.

Here’s a little about how Chembusters work - The pipes act as an Orgone antenna, and to some degree as an Orgone vacuum tube. They pull Orgone through from end to end. Also, the copper pipes act as a conventional EM antenna and therefore are able to assist the device in attenuating EM pollution.

There is a small quartz crystal inside one end of each pipe. The crystal acts as a lens to focus the energy so that a higher rate of flow can be achieved in the pipes, and to some degree acts to carry Radionic data concerning the function of the device.

Between the quartz crystal and the inner wall of the pipe is a dielectric layer. A chunk of garden hose or tubing works well for this and is convenient. This both isolates the quartz from the pipe electrically and acts as an Orgone vacuum tube (organic tube inside metallic tube) and speeds the Orgone through. This gives a strong flow bias to the pipe, inducing the energy to flow towards the end with the crystal. This is basic Orgone dynamics, many Orgone beamers are built using this principle and have been for decades.

The end (with the crystal) is then covered with a metal cap and connected to a large body of Orgonite. The Orgonite absorbs energy, pulling the energy in as the pipes push it out. The energy builds up in the pipes, the pressure (charge density) rises until it pushes through the metal cap and flows into the Orgone matrix material. When the Orgonite is connected to the Earth, the energy flows from the Orgonite into the Earth. As the energy flows through the MHD or HD Orgonite, it is processed by the Orgonite and harmful properties are removed. The pipes induce a large flow of energy, and the Orgonite cleans and balances the energy as it passes through.

As long as the Parts are of correct size in proportion to each other, the device will work dependably and with little or no maintenance. The overall energy storage potential of the Orgonite base should be at least 3 or 4 times the overall energy storage potential of the pipes. This will ensure that the energy flows from weakest potential (the pipes) to strongest potential (the Orgonite ballast at the base of the device) under normal circumstances.

As a rule of thumb, you could say that with MHD Orgonite If your pipes are six to eight feet long and .75 to 1.5 inches diameter, you need 2 to 3 gallons of Orgonite. If HD, then 1.5 to 2 gallons for the same pipe lengths.

All in all, I have to say that Orgone tech applied to the problem of environmental pollution has proven more effective for me than any amount of petition signing I have done ... ever.

Things aren’t completely normal, the world is definitely changing. But I’ve been ‘gifting’ (using Orgonite tools for environmental healing) for about 4 years now in this area, and the results have been intriguing. The smog often forms up in a wall abutting the area where the devices are installed, and you can observe that the sky on one side of the line is grey and oily, and on the other side the sky is clear with scattered puffy clouds and the haze from the chemtrails is absent. This ‘hole’ has taken the form of a long ellipse which runs out to the northwest and southwest for many miles, and shrunk to the point of disappearing at times, only to reappear within a few days at most, always in the same general area. There s no regular rhythm to the opening and closing of the hole, it appears to be in response to changing weather conditions.

Chembusters and TBs, when deployed together, generate a geostable Orgone environment which manifests measurable and benign changes to the weather patterns in the area of their use.

Below are some more points of view from folks who have had the time and metaphysics expertise to form a substantive opinion. For more information about TBs, small devices which perform the same healing action as a Chembuster on a smaller scale, visit www.littlemountainsmudge.com/info.htm .

©2005 Jon Logan

Excerpts from other articles:

Has The Philosopher's Stone Been Found? By Aurum Solis

Several researchers in the field of orgonomy including Life Technology Research International (www.lifetechnology.org) and Jon Logan have been using various exotic materials in the manufacture of their Orgonite. One such exotic material worthy of special note is ORMUS.

These newly discovered materials have been called ORMEs, monoatomic gold, white gold, white powder gold, ORMUS, m-state, AuM, microclusters, and manna. David Hudson calls the materials he found Orbitally Rearranged Monoatomic Elements or ORMEs. He also refers to them as monoatomic elements in a high-spin state.

It is claimed by many users of our Alpha Matter ORMUS Orgonite enhancer that there is a noticeable improvement of Orgone output in ORMUS enhanced Orgonite mixtures. We conducted several tests to verify these claims and did discover that the ORMUS enhanced Orgonite material did in fact generate ten times more Orgone. Several clairvoyants described the new material as having a larger field with a variety of colors and having a more radiant nature.

It appears that these effects can be ascribed to the monatomic elements present in the mixture. They behave in this fashion because they are in such a finely divided state and are therefore capable of much faster attraction and repulsion of Orgone. Much more research needs to be conducted in this field to realize the great potential of this fascinating substance.

An Introduction To ORMUS - In March of 1988, David Radius Hudson filed U.S. and worldwide patents on eleven Orbitally Rearranged Monatomic Elements, ORMES, which he discovered in a form not previously recognized... "

Dowsing - A Multipurpose Tool by Ted Stretmoyer

Dowsing is a method of finding things or arriving at a straightforward “yes” or “no” answer by connecting to your Source. Dowsing has been around for millennia. Moses is said to have dowsed for water while the Children of Israel wandered about in the desert. One theory is that dowsing works by connecting with your magnetic field, or aura, and that of the Earth. More experience with this attunement allows for more accuracy.

Dowsing isn’t difficult, but 98% of it is your own focus. In order to focus properly, you must detach from all of the concerns and stresses accumulated over the day and mentally shove them into a file cabinet to be dealt with later. This will help you to better connect with your Higher Self, the portion of yourself that is closest to Spirit, and obtain the answers you need. You may find prayer or meditation beneficial in aiding you to focus in bringing in this higher source of information. If your mind is filled with anxieties, then that’s what you’ll dowse and it won’t be very accurate. Clear your mind and get yourself out of the way. Many people pray for guidance before starting to dowse; after all, dowsing is a spiritual science. Detachment from the answer is also a key to good dowsing.

I first began dowsing while giving a go at “living off the land” some eleven years ago in New Mexico on some family property.  Years earlier, I watched as my stepfather took a forked willow tree branch and dowsed for water on the property for a new well.  The branch made deep creases on his inner arms just below the elbows.   At the time dowsing appeared to me to be something that perhaps you needed to be specially gifted to be able to do.   When I returned to the property years after his death, I decided to give water dowsing a try myself so that I could locate the perfect spot for a new well.  I took a branch from a tree that had recently been cut by another family member (without my approval).  The branch was still very much alive.   I decided to try a technique of my own by holding the branch in my two hands.   As soon as I had taken a hold of the branch,  I was very nearly forced along the property at a fast pace to a given direction and then the branch literally yanked my arms down at a specific spot.   As my wife looked on she believed I would probably break my leg in a gopher hole as fast as I was going without looking.   After marking the spot where the branch drew to the ground.   I then walked several yards away, turned around and shut my eyes and was again drawn to the exact same spot.   This was where we would find water for..."

Orgonite and the BG3 by Francois Capmeil

I started to make Orgonite some years ago, mostly  copying other people’s designs. The designs looked good and were fun to make, but the question of their effectiveness quickly came to the surface. It did not take me long to realize that few people really knew about the theory behind their design and how to test them. This nagged me for a while, so I looked around until I came across someone who mentioned measuring the field of an Orgonite device using “the Bovis scale”. Researching the matter I found that this person used a pendulum.

I liked the idea and joined the American Society of Dowers. I attended their Annual conference which was coming then in Vermont USA. Over the years, one thing led to another and I got the chance to meet some remarkable people who have learned or inherited knowledge. They kindly shared their knowledge either through courses or personally. So I slowly learned a great deal about subtle energies, what they are, how to measure them and how to use them to make my environment safer, friendlier and more supportive.

Today, although I am still a student, I want to share some of  what I have learned as a way of introducing others to this subject. I will also share contact details so you can follow up and learn more, if you are interested. There will be 3 installments, this one about the theory, the next one about measuring and the last one about simple and effective applications everyone can apply.

The story of Orgone is fairly well documented, and Wilhelm Riech’s books are easily obtainable, so I will not talk about that, but rather about a discovery (or really a re-discovery) make by 2 French scientists in the 1930’s Andre Chaumery and Leon De Belizal. Their field of expertise was micro-vibrational physics. They found that both the circle and the sphere manifest a spectrum of 12 energies qualities. These energies qualities are in resonance with the colors of the spectrum and so they named them after the colors. In doing so they ran short of one name, so they called the energy quality opposite green “Negative Green”, not because it was negative in nature but because it appeared..."

BONUS - Sample article from issue 3

Real Deal Radionics

Aetherochemical Effects in Orgonite
(Original title: Orgone Advances)
By Robert Neil Boyd and Joshua Kenneth Gulick

Editors Note - This is exactly the kind of forward-thinking applications for orgone technology that i am always pleased to see. In the following brief article, a researcher reports that he has been able to induce some of the effects of a drug by using the energy signature of that drug as a component of orgone matrix material. I look forward to hearing more on this subject, and consider it to be a validation of the Aetherochemical effects associated with radionics and homeopathy.

[Comment on list from Joshua Kenneth Gulick]: Most people use orgone energy devices which are made with bits of metal imbedded in a resin matrix. The composite is called orgonite. It is "generally agreed" that it puts out a subtle energy field. I have done experiments to modify the energy signature of orgonite by substituting various substances in place of the conventional resin material. I used very fine copper powder as the conductive material. It is quite easy to produce orgonite with odd and very easily discernable physical effects. I have not done many experiments along these lines, but the results were so pronounced and significant that it is important for me to share what I have just learned.

My first experiment with modified orgonite used approximately 25 grams of copper powder and approximately 30 grams of Piracetam, which is a nootropic drug with an affinity for a number of neural receptors. The Piracetam was melted, mixed with copper powder, and solidified into a button shape in a plastic cup. This is the most obviously powerful one I have made. When held in the palm of the hand for a minute or so, the muscles in one's forearm and hand become weak; when held a few minutes longer, actual tremors begin and strengthen. Perhaps it should be stated that I do not normally have shaky hands or anything, and the effect has been confirmed by multiple friends. Very obviously, a specific neuroactive energy signature is being broadcast by the orgonite and received by the body.

Another, much smaller, orgonite button was made with copper powder and a testosterone analogue. Without a single doubt, this material specifically affects either my hormone levels or hormone receptor sensitivity when in proximity.

Does anyone else see the significance here? It seems like a whole new class of bioactive materials! Cheap, easy as pie to make, and a strong, specific and permanent biological effect depending on the material used. Imagine the possibilities! An antibiotic that you sit on your dresser? Cancer drugs you wear around your neck? Insulin bracelets?

Will anyone help me research this? I have just set up a yahoo group for interested individuals. Visit http://groups.yahoo.com/group/bedr/

[Response by R. N. Boyd]: To market these devices, we would need verifiable products with specific uses. Have you thought of trying this with, say, olive leaf extract, for example? I have some concerns. One is that external agencies might find a way to neutralize it, and secondly that there has been little research done on possible side effects and environmental influences, as far as I can see.

There is also the possibility, based on my spin field researches, that the effects will be analogous to the desired substance, rather than exact duplications of the effects of the substances. The reason for this has to do with the properties of the ability of the spin field, the magnetic vector potential, and orgone, to transfer information about a substance, while there is no substance actually present in the biological system. What happens as a result of this, is that some substances will exhibit absolutely no effect on the human physiology, while other substances will exhibit analogous effects. The difference has to do with the fact that the influences of some substances on the physiology are primarily due to the informational content of the material, while in other cases, the activity is primarily due to a chemical interaction with the body chemistry. This is Aether technology. Orgone is a variety of Aether, or so it appears to me from my spin field researches.

This article originally appeared on the following web page:
http://www.rialian.com/rnboyd/orgone-copper.htm
©2005 R.N Boyd and J. K. Gulick

Modern Orgone is the magazine for backyard quantum mechanics of all ages! Get more out of your garden using bioenergy-enhanced cultivation methods, pick up techniques for self-help and personal empowerment, and learn the things you can't learn at your local library...

North American

Worldwide

Orgonite ^TM is a trademark belonging to Karl Welz, the inventor of orgonite, and is used on littlemountainsmudge.com for educational purposes.  Wizzer's Workshop ^TM,  Ergonite ^TM,  Welzite ^TM, Wood Sprite ^TM, Water Baby ^TM, Chocolate Shine ^TM and O-Matrix Material ^TM are trademarks of Jon Logan, Owner of littlemountainsmudge.com. All text and images on this site on this site, unless clearly otherwise stated, are copyright 2003-2006 Jon Logan, all rights reserved. Limited authorization to reproduce: This material may be reproduced or reprinted freely, in whole or in part, for educational purposes.  Owner of copyright for text and images on littlemountainsmudge.com and trademarks used on littlemountainsmudge.com  reserves the right to refuse, suspend or revoke limited authorization to reproduce this material if the material is reproduced inaccurately, or if printed material from this website is sold at a cost in excess of it's production without prior written consent from the owner, or if printed material from this site is used commercially without stating in the printed copy that the material is copyright 2003-2006 Jon Logan. Webmasters using material from this site must include " courtesy Wizzers Workshop http://www.littlemountainsmudge.com" at the end of the portion of content which is reproduced on your website.