The Orgone Modulation Device

This device is the first device to have combined orgone matrix material, a quartz / mobius core and an external metallic reflector. It was also the device which originated the combination of existing audio technology to drive the coil. This device was invented after the original Orgonite compound and orgonite generators. It was invented after the 'succor punch'.

It was invented BEFORE the powerwand (as was the OFP). It was originally published to the web on this page: http://tech.groups.yahoo.com/group/MyAshtray/message/91

on

Sat Sep 14, 2002 9:11 pm

This is a dated design, left here for reference.

What is an ORMD

An ORMD (orgone modulation device) generates an orgone field, and allows you to configure the pulse rate/pulse pattern of that orgone field.

The array of pipes When you have an metal pipe coated with an organic material, you get an effect whereby orgone will wick into the pipe from the sides and flow out of the ends, kinda similar to a convection current. The orgone has to come out of the ends, because it does not really compress very well. With respect to compression, orgone behaves a lot like a liquid. The potential inside the pipe will build until a relatively low threshold of intensity is reached, at which point it will begin to flow out of the ends of the pipe because it has to go somewhere, and it is easier for it to flow linearly inside the pipe and out of the end than to go back through the wall of the pipe. So basically, on the ORMD there is an array of pipes which form a natural flow of orgone energy into and through the pipes. Similar to a cloudbuster, but with the pipes coated in organic matter, in the style often called a shooter. Also, the pipes used in this device are steel, and the wall of the pipe is about 1/8” thick. There is a great deal of info about the various ‘OR shooter’ styles available on the web.

 The ‘orgonite’ Connected to the array is a smaller mass (in proportion to the combined mass of the pipes) of orgone matrix material. Orgone matrix material, or orgonite, has not only the property of changing OR from one form to another, but also the property of ‘generating’ OR when stimulated by other kinds of energy... like light, sound, physical motion, or in this case electricity.

The coil assembly Connected to the orgone matrix material is a simple assembly which has a smaller mass again (smaller than the mass of the orgone matrix material).  This is a coil, wound around a core composed of a medium-sized quartz crystal . The crystal is cast in a cylinder of polyurethane resin. Orgone will also often flow with and pulse in rhythm to a magnetic field. The coil is wrapped like a caduceus coil, except that the wraps are close together, and there are 4 layers to it. Unlike electricity, orgone will flow from a smaller potential to a larger potential. This potential may be determined by mass, type of mass, and excitation of mass. So if the potential of the pipes is greater than the potential of the orgonite, the energy will naturally flow from the orgonite into the pipes, instead of mainly flowing from the pipes into the orgonite. Same applies with the crystal and coil assembly. Getting the sizes right in proportion to each other is important, and while I urge you to experiment with this design, I offer these proportion as something which is currently working. This is a low resistance coil and I have not run large amounts of electricity through it. You are responsible for your own safety. I at present consider weak electrical currents to be sufficient to operate the device. A ‘large’ diameter copper wire is used in the coil (14 gauge 110V house wiring). Annulated wire could be used instead of insulated wire. I prefer to use insulated wire because it’s easier than painstakingly separating the windings so the coil doesn’t just short out.

 Using this device, I have been consistently producing a strong orgone field around the ends of the pipes. At least one of my friends who does not usually ‘feel’ the energy in his hands reported feeling a ‘kind of like a cool breeze’ when the machine was turned on, and could notice a difference when the machine was on and off. So far I have been using signal generator software on my pc and feeding the signal through a stereo amp before connecting the amp output to the device. Doing it this way is simple, cheap, and effective. It also offers a broad range of frequencies to work with. I also use some of my favorite songs as a signal to run through the coil. It basically seems to make a unique pulsing orgone field to every signal you run through it.
Being an unashamed dreamer, some possible uses I envision for devices of this type are:

A- a radionics machine with some pants on it.

B- giving the owner a dependable supply of orgone energy to charge their own water, experiment with orgone therapy... “...” etc. A supply of orgone which can be generated on demand and tailored to suit the need... offering an alternative to the ORAC as a means of procuring orgone to work with.

If you construct and use this device, be sure to either put the device in series with one of the speakers so you don’t blow up your amp, or connect a mass resistor to the circuit so your amp does not perceive it as a short. The resistor you will need depends on your amp, check what your speakers say on the back beside the S symbol (ohms). I am not responsible for any damage this device may cause to your stereo, or any other damages of this type resulting from any use of this device.

Using a coil and an electrical current, it is possible with the technology of the day to exert a relatively precise control over exactly what the frequency , waveform and amplitude of excitation are. Unless you are superstitious about using electricity in connection with orgone energy, in which case you will be unable to take advantage of readily available resources. Radio shack radionics... :-)

 When the coil produces a changing magnetic field, the changes in the magnetic field (magnetic flux) excite a mass of orgone matrix material, which in turn produces an enhanced flow of undifferentiated (technically white, I suppose, but most clairvoyants see it as blue) orgone, which is pulsing rhythmically in tune with the frequency of excitation.  After the orgone has left the orgonite, the conditions which ‘force’ it to exists in an undifferentiated, or chaotic state no longer exist, and the orgone collapses back into a defined state. The pulse rate of the orgone field, defined by the frequency used to excite the orgonite, defines what ‘color’ the orgone produced will be. By inducing this orgone to flow into an array of pipes, we can both direct it and allow it to become differentiated again into whatever ‘color’ of orgone corresponds to the frequency used to excite the mass. This is possible, I would assume, because, unlike the orgonite, the steel in the pipe simply colors it a little with the waveform of steel, it does not reduce it to undifferentiated orgone. So far I have been able to produce every Radiesthetic ‘color’ using this device, including the inimical ones.

Click on a schematic to enlarge  Questions or feedback
The device as configured presently does not produce a beam, that would require a lens to focus the output. Rather, it produces a toroidal field with a strong potential or ‘charge point’ at the ends of the pipes. This is a second generation prototype and is still under development. When I get time I will produce a set of instructions for the construction of this device. In the meantime, click on the thumb nailed schematics to view them. Feel free to copy and print or save them. 

Jon Logan